Fix Faulty Hardware corrupted page error on Windows 10

If you’re facing Blue Screen of Death error message “Faulty hardware corrupted page” on Windows 10 then don’t panic because today we are going to see how to fix this issue with this guide. When you see this BSOD error message then you don’t have any choice but to restart your PC, where sometimes you are able to boot to Windows, sometimes you don’t. The full error message which you see on the BSOD screen is:

Your PC ran into a problem and needs to restart. We’re just collecting some error info, and then we’ll restart for you. (0% complete)
FAULTY_HARDWARE-CORRUPTED_PAGE

Cause of Faulty Hardware corrupted page error?

Well, there can be many reasons as to why you’re facing this issue such as recent hardware or software installation might be causing this issue, virus or malware infection, corrupt system files, outdated, corrupted, or incompatible drivers, Windows registry corruption, faulty RAM or bad hard disk, etc.

Fix Faulty Hardware corrupted page error on Windows 10

Make sure to  create a restore point  just in case something goes wrong.

Note: If you have recently installed new hardware or software, then the problem may be caused because of that, so it is advised you remove that hardware or uninstall the software from your PC and see if this fixes the issue.

Method 1: Update Unknown Drivers in Device Manager

this post to find drivers for unknown devices in Device Manager .

Method 2: Disable Fast Startup

Windows kernel is loaded and system session is running which alerts device drivers to prepare for hibernation i.e. saves all current applications and programs running on your PC before closing them.

disabling the Fast Startup feature has solved this issue on their PC.

Method 3: Test RAM for Bad Memory

test your Computer’s RAM for bad memory in Windows . If bad memory sectors are found in your RAM then in order to Fix Faulty Hardware corrupted page error on Windows 10, you will need to replace your RAM.

Method 4: Make sure Windows is up to date

1.Press Windows Key + I to open Settings then click on Update & Security.

2.From the left-hand side, menu click on Windows Update.

3.Now click on the “Check for updates” button to check for any available updates.

4.If any updates are pending then click on Download & Install updates.

Once the updates are downloaded, install them and your Windows will become up-to-date.

Method 5: Reinstall the problematic driver

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand Display adapters and then right-click on your NVIDIA graphic card and select Uninstall.

2.If asked for confirmation select Yes.

3.Reboot your PC to save changes.

Update Device Drivers on Windows 10 .

Method 6: Update BIOS

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10.

So it is advised to update BIOS in order to fix the issue.

Note: Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, expert supervision is recommended.

Method 7: Run Driver Verifier

Driver Verifier  in order Fix Faulty Hardware corrupted page error on Windows 10. This would eliminate any conflicting driver issues due to which this error can occur.

Method 8: Update Intel Management Engine Interface (IMEI)

download Intel Management Engine Interface (IMEI) .

2.Double-click on the downloaded .exe and follow on-screen instructions to install the drivers.

3.Reboot your PC to save changes.

Method 9: Reset Windows 10

Note: If you can’t access your PC then restart your PC a few times until you start Automatic Repair. Then navigate to Troubleshoot > Reset this PC > Remove everything.

1.Press Windows Key + I to open Settings then click on Update & Security icon.

2.From the left-hand menu select Recovery.

3.Under Reset this PC click on the “Get Started” button.

4.Select the option to Keep my files.

5.For the next step you might be asked to insert Windows 10 installation media, so ensure you have it ready.

6.Now, select your version of Windows and click on only the drive where Windows is installed > Just remove my files.

5.Click on the Reset button.

6.Follow the instructions on the screen to complete the reset.

Recommended:

  • How to install Internet Explorer on Windows 10
  • Fix Printer Driver is unavailable on Windows 10
  • How to Fix Computer Shuts Down Randomly
  • Fix Logitech Wireless Mouse Not Working

That’s it you have successfully Fix Faulty Hardware corrupted page error on Windows 10 but if you still have any questions regarding this post then feel free to ask them in the comment section.